Description Product information Fagor AML 910 KIT mast amplifier power supply The antenna amplifier package includes the Fagor AML 910 DC mast amplifier and Fagor FA 242 power supply. The Fagor AML 910 DC mast amplifier has one UHF output, a gain control potentiometer, and LTE700 filtering. The Fagor FA 242 power supply has two outputs and is installed indoors. Its task is to supply power to the amplifier located on the mast via the antenna cable. The same cable also carries the signal from the mast to the power supply. Using the mast amplifier and power supply: The mast amplifier is installed on the antenna mast tube near the antenna to amplify the TV signal. The amplifier package includes a power supply that supplies power to the amplifier via the antenna cable. The purpose of the antenna amplifier is to boost the signal received from the antenna. The mast amplifier and power supply are used in poor reception conditions. The amplifier should be placed as close to the antenna as possible and the power supply should be installed indoors. The voltage supply is supplied via the antenna cable. It is important to note that there should be no components between the devices that do not allow the electric current to pass through, such as splitters or antenna sockets. Low noise level, sufficient gain, and good mechanical protection are the most important features of the amplifier. The DC pass of the antenna amplifier can be left in the OFF position where it is by default. The UHF gain is also set by default to 35 dB, which is the maximum power. Typically, the gain does not need to be adjusted. Fagor mast amplifier AML 910 DC D2 Input: UHF Gain: UHF 35 dB Noise: 3 dB Gain: Adjustable potentiometer LTE filter: Yes Fagor Mast Amplifier AML 910 DC D2 PDF brochure Fagor FA 242 power supply The power supply is used to provide power to the mast amplifier. (Power is provided through the same antenna cable that carries the signal from the mast to the power supply.) Outputs: 2 (also available in 4-output) Attenuation: 4 dB Output voltage: 24 Vdc Max. output current: 150 mA
