Home Accessories Interface Cards, PoE Injectors 10G/5G/2.5G/1G PoE NBASE-T Ethernet Card2-CH 10G/5G/2.5G/1G PoE NBASE-T Ethernet Card 4-CH 5G/2.5G/1G PoE Ethernet Card PCIE-POE1-10G-IOI supports 10GBASE-T Ethernet in compliance with the IEEE 802.3an standard, as well as 5 Gbps and 2.5 Gbps Ethernet speeds over standard Cat 5e and Cat 6 copper cables. The PCIE-POE1-10G-IOI is also backwards-compatible with legacy 1000BASE-T Ethernet. Note: This card does not support RDMA (RoCE v2) Specifications Manufacturer # ioi GE10P-PCIE4XG303 PCI Express PCI Express Gen3 or Gen2, (Supports line rates of 8.0 GT/s and 5.0 GT/s per lane) Bus width: Supports Gen3 x4 or Gen2 x4 MSI, MSI-X, and legacy INTx PCIe interrupts, Improved CPU utilization and network performance MAC Large Send Offload (LSO), Receive-Side Scaling (RSS), Direct Cache Access (DCA) header checksum WoL power management On-chip CPU DASH MACsec Quality of Service (QOS) support Jumbo frames (up to 16Kbytes) IPv4, IPv6/TCP and IPv6/UDP checksum offload PHY Integrated Marvell AQrate PHY featuring NBASE-T technology 100 meters over Cat 6a at 10Gbps 100 meters over Cat 5e and Cat 6a at 5Gbps/ 2.5Gbps/ 1Gbps/ 100Mbps Advanced cable diagnostics with On-chip high resolution cable analyzer Audio Video Bridging (AVB) and 1588v2 EEE support Supported Data Rates: 10G/ 5G/ 2.5G/ 1G/ 100 Mbps Standard compliance: IEEE 802.3bz – NBASE-T, IEEE 802.3x – flow control, IEEE 802.1P – quality of service, IEEE 802.1QAV – AVB Number of Port One 10GBASE-T RJ45 Ethernet port with Screw Holes for thumbscrew locking Type Ethernet Cable
