Cisco ASR1001 X Services Router – ASR1001-X – NEW Specifications: Model: ASR1001-X Brand: Cisco Condition: NIB Warranty: 3 Years Device Type: Router Physical specifications Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets. Refer to the applicable hardware installation guide for additional details. – Height: 1.71 in. (43.43 mm) – Width: 17.3 in. (439.42 mm) – Depth: 18.17 in. (461.5 mm) – Weight: 25 lb (11.35 kg) fully loaded Note: The Cisco ASR 1001-X Router has the route processor, ESP, and SIP integrated. – Default memory: 8-GB DRAM shared across route processor, ESP, and SIP – Shared port adapters: 1 single-height SPA slot – Ethernet port adapters: N/A – Cisco ASR 1000 Series ESP: Integrated in chassis – Route processor: Integrated in the chassis: Cisco ASR 1001-X Series Route Processor with Quad-Core Processor – Redundancy: Software: Yes – Built-in Gigabit Ethernet ports: Yes: 6 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports – Network interface module: Yes – Cisco ASR 1000 Series: Cisco ASR 1001-X – ESP support: Cisco ASR 1000 Series 2.5-Gbps ESP (default). Upgradable through a software-activated feature license to 5, 10, or 20 Gbps – ESP bandwidth: 2.5 to 20 Gbps – ESP memory: Share the same control memory on the route processor – SIPs and Ethernet line cards: Integrated in chassis; not upgradable – Embedded hardware-based encryption: Yes: Up to 8-Gbps crypto support throughput – Minimum Cisco IOS XE Software release: Cisco IOS XE Software Release 3.12.0 – Rack-mounting: Yes: 19-inch – Wall-mounting: No – External USB flash memory: 1-GB USB flash-memory support – Redundant power supply: Yes: Dual power supplies by default; option of either AC or DC power supply. Note: A mix of one AC and one DC power supply is not supported. – Power input: Worldwide ranging AC input range (85 to 264 VAC), Worldwide ranging DC, (-40 to -72V; 48V nominal) – Power consumption: Maximum (DC): 242W, Maximum (AC): 250W, Maximum (out): 250W. – Airflow: Front-to-back – Operating temperature (nominal): 32 to 104 F, (0 to 40 C) – Operating temperature (short-term): 32 to 122 F, (0 to 50 C) – Operating humidity (nominal) (relative humidity): 10 to 85% – Operating humidity (short-term): 5 to 90% – Storage temperature: -40 to 150 F, (-40 to 70 C) – Operating altitude: -500 to 10,000 feet, (152 to 3048 meters) – EMC standards: FCC 47 CFR Part 15 Class A, VCCI Class A, AS/NSZ Class A, ICES-003 Class A, EN55022/CISPR 22 Information Technology Equipment, (Emissions) EN55024/CISPR 24 Information Technology Equipment (Immunity) EN300 386 Telecommunications Network Equipment (EMC) EN50082-1/EN61000-6-1 Generic Immunity Standard. – Safety Standard: UL60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1, IEC 60950-1, AS/NZS 60950.1
